Appendix; Specifications; Appendix Specifications - Teledyne 514 Instruction Manual

Appendix

Specifications

Accuracy:
Reproducibility:
Noise:
Drift:
Diurnal:
Sensitivity:
Electronic Response:
Light Source:
Filter Wavelengths:
Sample Cell:
Flow Rate:
Ambient Temperature:
Electrical Requirements:
Readout Device:
Analog Output Signal:
Options Designated by Model # Suffix
I5, I20 or I50:
S1 or S2:
K5, K10 or K100:
E5 or E10:
O5, O20 or O50:
Teledyne Analytical Instruments
A Business Unit of Teledyne Electronic Technologies
±2% full scale or better
±1% full scale or better
Less than ±1%
Less than 1% per day
Less than 1% per day
0.02 to 1.5 absorbance units
90% in 10 seconds
Quartz iodine lamp
1.0 to 2.8 microns
Stainless steel with sapphire windows,
standard; others available;
length per application
Typically 50-200 cc/min. (depending
upon application)
0° to 50° C (without available auxiliary
heating).
115 VAC, 60 Hz (standard)
Meter on control module
0-1 V (standard)
B1: Local Explosion Proof Control Unit
B2: Remote Explosion-proof Control Unit
Current Outputs
One or Two Alarm Circuits
Millivolt Output Signals
Voltage Outputs in lieu of 0 to 1 V output
D: Dual Range
A: Automatic Zero
Optically Isolated Current Outputs
(explosion-proof control unit only)
Appendix
A–1