Mitsubishi 4G9 series Manual page 48

4G9 ENGINE (E - W) -
<CARISMA>
Tab
<PAJERO io>
Intake manifold
Bolt
Intake
manifold
stay
Bolt
Cylinder block
E
Mitsubishi Motors Corporation
Throttle Body and EGR System (GDI)
INSTALLATION SERVICE POINTS
"AA THROTTLE BODY GASKET
"BA INTAKE MANIFOLD STAY INSTALLATION
(1) Tighten the four bolts at the top and bottom of the stay
(2) Check that the stay seating surface is in close contact
(3) Tighten the four bolts to the specified torque.
Dec. 1998
handtight.
with the bosses on the intake manifold and the cylinder
block.
PWEE9502-E
11A-5a-3
Added