Mitsubishi 4G9 series Manual page 111

11A-10-6
<SOHC, DOHC, DOHC - GDI for CARISMA>
<DOHC - GDI for PAJERO io>
Oil passage
E
Mitsubishi Motors Corporation
4G9 ENGINE (E - W) -
(4) Tighten the lower oil pan mounting bolts in the sequence
"EA OIL FILTER INSTALLATION
(1) Clean the filter installation surface of the cylinder block.
(2) Apply engine oil to the O-ring of the oil filter.
(3) Screw in the oil filter until its O-ring comes in contact
"FA SEALANT APPLICATION TO OIL PRESSURE
(1) Apply sealant to the threads of the switch.
INSPECTION
OIL PUMP
(1) Check the tip clearance.
Dec. 1998
Front Case and Oil Pump
shown in the illustration.
with the base. Then tighten one more turn.
SWITCH
Specified sealant:
3M ATD Part No. 8660 or equivalent
Caution
Use care not to allow the sealant to plug the oil
passage.
Standard value: 0.06 - 0.18 mm
PWEE9502-E
11300730026
Added