Mitsubishi 4G9 series Manual page 26

4G9 ENGINE (E - W) -
MD998781
MD998781
E
Mitsubishi Motors Corporation
REMOVAL SERVICE POINT
AA" CRANKSHAFT BOLT REMOVAL
(1) Use the special tool to hold the flywheel or the drive
INSTALLATION SERVICE POINTS
"AA CAM POSITION SENSOR SUPPORT
(1) Apply a 3 mm bead of form-in-place gasket (FIPG) to
"BA CRANKSHAFT BOLT INSTALLATION
(1) Use the special tool to hold the flywheel or the drive
Dec. 1998
Alternator and Ignition System
plate, and then loosen the crankshaft mounting bolts.
INSTALLATION
the area shown.
Specified sealant:
Mitsubishi Genuine Part No. MD970389 or
equivalent.
plate, and then tighten the crankshaft mounting bolts.
PWEE9502-E
11A-3-7
Added