Convenient Operation Of The Unit - Sharp MD-SR70H Operation Manual

Portabler mini-disc recorder
Hide thumbs Also See for MD-SR70H:
Table of Contents

Advertisement

CONVENIENT OPERATION OF THE UNIT

Checking the remaining amount
of battery level
The remaining amount of battery level is
shown by the battery indicator (
ing operation.
Battery indicator
< How to read the battery indicator >
When the battery
When the battery
level is high
level is very low
Since the battery level is very low, you
cannot start recording or editing.
When the battery is completely discharged,
the battery indicator will flash. Recharge the
battery or replace the alkaline battery with
a new one.
When the battery has run completely out,
"BATT EMPTY" will appear. Then, the
power will be disconnected automatically.
Notes:
If you use the battery which you stopped
charging halfway, "
" may appear. It
does not mean that the battery is com-
pletely charged.
When using the unit with an alkaline bat-
tery or a rechargeable battery, the battery
indicator will not correctly display the remain-
ing capacity for approximately 10 seconds
after the power has been turned on.
When the AC adaptor included with this unit
or a separately available car adaptor is
used, the battery indicator will not be shown.
The number of bars shown in the battery
indicator may increase or decrease, de-
pending on the operation being performed.
This is normal.
To prevent the unit from being
operated by mistake
To avoid accidental operation of the unit,
use the hold function.
) dur-
Move the HOLD switch to the safety posi-
tion (direction indicated by the arrow).
When the unit is in the hold mode, press-
ing the buttons will have no affect.
To cancel the hold mode, move the
HOLD switch away from the safety po-
sition (the opposite direction of the ar-
row).
Cannot be operated
from either the
remote control unit or
the main unit.
Can only be operated
from the main unit.
Can only be operated
from the remote
control unit.
Can be operated
from either the
remote control unit or
the main unit.
If the hold function is active whilst the power
is turned off, the power cannot be turned
on by mistake and the battery will not be
accidentally drained.
E-31
Remote
Main
control unit
unit
Hold
Hold
Cancel
Hold
Cancel
Hold
Cancel
Cancel

Advertisement

Table of Contents
loading

Table of Contents