Sharp MD-SR70H Operation Manual page 17

To check the remaining disc time
Whilst recording, you can check the remain-
ing time available on the disc.
Press the DISP button whilst recording or
whilst in the recording pause mode.
Remaining recordable time
When the DISP button is pressed again,
the unit will return to the initial display.
Note:
The display of the remaining disc time
may vary slightly from the actual remain-
ing time (page 37).
To create your own track numbers
whilst recording
You can create your own track numbers at
special points in a recording, so that these
points can easily be found later.
At any point where you want to create a
track number whilst recording, press the
REC button.
The track number will be written on the
disc and the recording will continue un-
interrupted.
Double time recording in monau-
ral mode
When recording in the monaural long-play
mode, you can record twice as long as the
recording time available for a stereo record-
ing. The monaural long-play mode is very
useful for recording conferences or lectures.
Press the MODE button whilst the record-
ing is paused.
Each time this button is pressed, the dis-
play will switch between the stereo mode
and the monaural long-play mode.
Lights up whilst in the
monaural long-play mode.
Notes:
If input is from a stereo source, the
sounds from the left and right channels
will be combined.
Although the monitor sound you hear in
the earphones whilst recording is in ste-
reo, recording will be monaural.
MiniDiscs recorded in the monaural
long-play mode may not play on other
MD players.
When a recording is made in the mon-
aural long-play mode, you will be able
to play back the MiniDisc twice as fast
as the normal playback speed (page 23).
When the unit is stopped after a record-
ing has been made in the monaural long-
play mode, the recording mode will re-
turn to the stereo mode automatically.
E-16