Sharp MD-SR70H Operation Manual page 18

To erase tracks
To erase tracks one at a time:
1
Start playing the track you want to erase,
and press the 06 button.
The unit will enter the pause mode.
2
Press the EDIT button to select
"ERASE".
1 2
Number of the
paused track
3
Press the ENTER/SYNC button.
To cancel the operation, press the
• /:OFF button.
4
Press the ENTER/SYNC button again.
The track will be erased.
3 4
5
To erase other tracks, repeat steps 1 - 4.
To erase all of the tracks at once:
1
Whilst in the stop mode, press the EDIT
button to select "ALL ERASE".
"ALL ERASE" can also be selected
by holding down the EDIT button for
at least 2 seconds.
2
Press the ENTER/SYNC button.
To cancel the operation, press the
• /:OFF button.
1
3
Press the ENTER/SYNC button again.
All of the track numbers, track names,
and disc names will be erased.
Notes:
Once a track has been erased, it can-
not be recovered. Double-check the
track number before erasing it.
When a track is erased, the numbers as-
signed to the tracks following the erased
track will be automatically decreased by
one.
When a track is erased, the track name
will be erased at the same time.
E-17
2