Specifications; Operation Manual - Sharp MD-MS701H Service Manual

Hide thumbs Also See for MD-MS701H:
Table of Contents

Advertisement

FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER TO
THE OPERATION MANUAL.
General
Power source:
DC 3.6 V (rechargeable lithium-ion
DC 5 V (AC adaptor)
AC 110 - 240V, 50/60 Hz
DC 3V:
DC 4.5V: Separately available car
Power consumption:
0.15 A (AC adaptor)
4 W
Output power:
RMS; 20 mW (10 mW + 10mW)
(0.2% T.H.D.)
Charging time:
Approx. 2.5 hours
(When using the AC adaptor included
with the unit)
Battery life:
When using two,
commerically available,
When using the
high capacity, "AA" size,
rechargeable battery (fully
alkaline batteries (in the
charged) included with the
separately available battry
unit
case)
Continuous recording:
Continuous recording:
Approx. 4 hours
Approx. 3.5 hours
Continuous play:
Continuous play:
Approx. 8 hours
Approx. 5 hours
The continuous recording time is for analogue input when the
volume level is set to "VOL 0".
The continuous play time shows the value when the volume level is
set to "VOL 15".
The above values are the standard values when the unit is charged
and used at an ambient temperature of 20
The operating time when using alkaline batteries may be different,
depending on the type and manufacturer of the batteries, and on
the operating temperature.
Input sensitivity:
Recording
level
MIC H
MIC L
LINE
Output level:
Headphones
LINE
Dimensions:
Width: 87.0 mm (3-7/16")
Height: 29.4 mm (1-3/16")
Depth: 81.5 mm (3-7/32")
All manuals and user guides at all-guides.com

SPECIFICATIONS

battery x 1)
Separately available battery
case, AD-M70BC
(commercially available, "AA"
size, alkaline battery x 2)
adaptor, AD-CA20X
(for cars with a 12-24V DC
negative earth electrical
system)
When using two, commercially
available, high capacity, "AA"
size batteries with the
rechargeable battery (fully
charged)
Continuous recording:
Approx. 7.5 hours
Continuous play:
Approx. 13 hours
o
C.
Reference input
Input
level
impedance
0.25 mV
10 k ohms
2.5 mV
10 k ohms
100 mV
20 k ohms
Specified
Maximum
Load
output
output level
impedance
10 mW +
32 ohms
10 mW
300mV
50 kohms
(-12dB)
– 3 –
MD-MS701H/MS702H
Weight:
MD-MS701H: 216 g (0.48 lbs.) with
rechargeable battery
MD-MS702H: 219 g (0.49 lbs.) with
rechargeable battery
Input socket:
Line/Mic/optical digital, microphone
(powered by the main unit)
Output socket:
Headphones (impedance: 32
ohms)/remote control unit
MiniDisc Recorder
Type:
Portable MiniDisc recorder
Signal readout:
Non-contact, 3-beam semi-coductor
laser pick-up
Audio channels:
Stereo 2 channels/monaural (long-
play mode) 1 channel
Frequency response:
20 - 20,000 Hz (± 3 dB)
Rotation speed:
Approx 400 - 900 rpm
Error correction:
ACIRC (Advanced Cross Interleave
Reed-Solomon Code)
Coding:
ATRAC (Adaptive TRansform
Acoustic Coding), 24-bit computed
type
Recording method:
Magnetic modulation overwrite
method
Sampling frequency:
44.1 kHz (32 kHz and 48 kHz
signals are converted to 44/1 kHz,
and then recorded.)
Unmeasurable (less than ±0.001%
Wow and flutter:
W.peek)
Specifications for this model are subject to change
without prior notice

Advertisement

Table of Contents
loading

This manual is also suitable for:

Md-ms702hMd-ms702hblMd-ms701hgy

Table of Contents