Sharp MD-SR70H Operation Manual page 34

To cancel the auto power save
function
Power consumption can be reduced by
controlling the memory storage time. You
can cancel the auto power save function.
1
Whilst in the stop mode ...
Hold down the MODE button until "SET
UP" appears.
When you release the button, "BEEP
ON" or "BEEP OFF" will appear.
2
Press the 5 or 4 button until "AUTO
Psave" appears.
3
Press the MODE button.
"Psave OFF" will appear, and the auto
power save function will be cancelled.
To restore the auto power save func-
tion, select "AUTO Psave".
4
Press the • /:OFF button.
The normal display will reappear.
About the sound skip guard memory:
During playback, approximately 10 seconds
of information is stored in the semiconduc-
tor memory. Therefore, even when the
pickup cannot read information for a second
or two due to an external shock, the sound
will continue without interruption because the
information stored in memory is used.
About the auto power save function:
This is a function used to save power when
using the unit with the rechargeable bat-
tery or the alkaline battery. Whilst in the auto
power save mode, 5 - 10 seconds of sound
information is stored in memory. When the
auto power save function is disabled, 10
seconds of sound information is always
stored in memory. (When the AC adaptor
or a car adaptor is used, the information
storage time is always 10 seconds, regard-
less of the auto power save mode.) When
the unit is used in places exposed to ex-
cessive vibration, cancel the auto power
save function.
E-33