Roland SuperNATURAL BRASS ARX-03 Owner's Manual page 35

Parameter Value
Time 0.1–6.0 sec.
Low Damp Freq 20–1000 Hz
Low Damp 1–100%
High Damp Freq 1000–10000 Hz
High Damp 1–100 %
High Cut Freq 1000–10000 Hz
Type: 6 (SRV ROOM)/ 7 (SRV HALL)/ 8 (SRV PLATE)
Pre Delay 0.0–100 ms
Time 0–127
Size 1–8
160 Hz–12500 Hz,
High Cut Freq
BYPASS
Density 0–127
Diffusion 0–127
Description
Time over which the reverb
sound decays
Frequency below which the low
range of the reverb sound will be
dampened
Amount of attenuation for LF
damp
(100%: no effect)
Frequency above which the high
range of the reverb sound will be
dampened
Amount of attenuation for HF
damp
(100%: no effect)
Frequency above which the high
range of the final output sound
will be cut
Delay time from the original
sound until the reverb is heard
Time over which the reverb
sound decays
Size of the room or hall
Frequency above which the high
range of the final output sound
will be cut
(BYPASS: no cut)
Density of the reverberation
Change in reverb density over
time
With higher values, the sound
will become denser over time.
This is particularly noticeable
with longer reverb times.
Parameter Value
LF Damp Freq 50–4000 Hz
LF Damp Gain -36–0 dB
4000 Hz–12500
HF Damp Freq
Hz
HF Damp Gain -36–0 dB
Description
Frequency below which the low
range of the reverb sound will be
dampened
Amount of attenuation for LF
damp
(0: no effect)
Frequency above which the high
range of the reverb sound will be
dampened
Amount of attenuation for HF
damp
(0: no effect)
37