Modulation Delay - Roland SuperNATURAL BRASS ARX-03 Owner's Manual

13: MODULATION DELAY

Adds modulation to the delayed sound.
When Feedback Mode is NORMAL:
fig.MFX40a
Balance D
L in
Delay
Modulation
Feedback
Feedback
Delay Modulation
R in
Balance D
When Feedback Mode is CROSS:
fig.MFX40b
Balance D
L in
Delay Modulation
Feedback
Feedback
Delay Modulation
R in
Balance D
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Parameter Value
NORMAL,
Feedback Mode
CROSS
Delay Left
0–2000 ms,
note
Delay Right
Feedback # -98– +98%
200–8000 Hz,
HF Damp
BYPASS
0.05–10.00 Hz,
Rate #
note
Depth 0–127
Phase 0-180 deg
Low Gain -15– +15 dB
High Gain -15– +15 dB
D100:0W–
Balance #
D0:100W
Level 0–127
Description
Selects the way in which delay sound is
fed back into the effect (See the figures of
algorithm.)
Adjusts the time until the delay sound is
heard.
Adjusts the amount of the delay sound
that's fed back into the effect.
Negative (-) settings invert the phase.
Adjusts the frequency above which sound
fed back to the effect is filtered out. If you
don't want to filter out any high frequen-
cies, set this parameter to BYPASS.
Frequency of modulation
Depth of modulation
Spatial spread of the sound
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the delay sound (W)
Output level
51