Auto Wah; Hexa-Chorus - Roland SuperNATURAL BRASS ARX-03 Owner's Manual

03: AUTO WAH

A filter that turns on and off to create a cyclical change in timbre.
fig.MFX08
L in
Auto Wah
R in
Parameter
Filter Type LPF, BPF
0.05–
Rate # 10.00 Hz,
note
Depth # 0–127
Sens 0–127
Manual # 0–127
Peak 0–127
Level 0–127
44
L out
R out
Value Description
Type of filter
LPF:
The wah effect is applied over a wide fre-
quency range.
BPF:
The wah effect is applied over a narrow
frequency range
Frequency of modulation
Depth of modulation
Adjusts the sensitivity with which the filter
is controlled.
Adjusts the center frequency at which the
wah effect is applied.
Adjusts the amount of the wah effect that
occurs in the range of the center frequen-
cy.
Set a higher value for Q to narrow the
range to be affected.
Output level

04: HEXA-CHORUS

Uses a six-phase chorus (six layers of chorused sound) to give richness and
spaciousness to the sound.
fig.MFX17
L in
Balance D
Hexa Chorus
R in
Balance D
Parameter Value
Pre Delay 0.0–100.0 ms
0.05–10.00 Hz,
Rate #
note
Depth 0–127
Pre Delay
0–20
Deviation
Depth
-20– +20
Deviation
Pan
0–20
Deviation
D100:0W–
Balance #
D0:100W
Level 0–127
L out
Balance W
Balance W
R out
Description
Adjusts the delay time from the direct
sound until the chorus sound is heard.
Frequency of modulation
Depth of modulation
Adjusts the differences in Pre Delay be-
tween each chorus sound.
Adjusts the difference in modulation
depth between each chorus sound.
Adjusts the difference in stereo location
between each chorus sound.
0:
All chorus layers are in the center.
20:
The chorus layers are spaced at 60-de-
gree intervals relative to the center.
Volume balance between the direct
sound (D) and the chorus sound (W)
Output level