Deleting Performance Songs Stored On Disk - Roland Atelier AT-60SL Owner's Manual

Chapter 7 Recording/Playing Back What You Play
If the following screen appears
The message below is shown when the performance song in
the unit has not been saved to disk.
fig.E-62
If you wish to erase the performance song
1.
Touch the <OK> button.
If you wish to save the performance song on a
floppy disk
1.
Touch the <Cancel> button.
Save the song on a floppy disk (p. 158).
If loading is canceled because the memory limit has been
reached, the following message will be displayed:
fig.E-30
160
Max Max Max Max
Min Min Min Min
Deleting Performance Songs
Stored on Disk
You can delete a performance song that was saved onto a
floppy disk.
1.
Insert the floppy disk containing the performance
data into the disk drive.
2.
Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
3.
Touch < > (Utility).
The Utility screen appears.
4.
Touch <Save/Delete>.
The Song Save/Song Delete screen appears.
fig.07-31_50
5.
Touch < >< > to select the performance data
that you wish to delete.
6.
Touch <Delete>.
The confirmation message appears.
fig.07-
If you touch <Cancel> the performance data will not be
deleted.
7.
When you touch <OK> the performance data will
be deleted.
Harmony Intelligence