Saving Registration Sets To A Floppy Disk - Roland Atelier AT-60SL Owner's Manual

Chapter 3 Using the Registration Buttons
Saving Registration Sets to a Floppy
Disk
With the settings of Registration buttons [1]–[12] (on the AT-60SL,
Registration buttons [1]–[8]) considered as one set, a single floppy disk can
store up to 99 sets of data. We recommend that complex panel settings or
Registrations you wish to keep be saved on disk. Furthermore, when you
save registrations created on the AT-80SL/60SL to floppy disks, you can call
up their settings on other Atelier Series instruments and use the
registrations the same way.
1.
Make sure that the disk drive contains a disk that was
formatted (p. 96) by the AT-80SL/60SL.
2.
Touch <Registration> on the Main screen.
The sub-window appears.
fig.03-04_55
3.
Touch <Save>.
The Registration Save screen appears.
fig.03-09_55
98
Max Max Max Max
Min Min Min Min
Harmony Intelligence
When you touch <go to
Load>, the instrument
jumps to the Registration
Load screen.
If you wish to assign a
name before you save, refer
to "Assigning a Name to a
Registration Set" (p. 94).