Accomp [1]; Bass [2]; Deleting Performance Songs Stored On Disk - Roland 60S Owner's Manual

Chapter 7 Recording/Playing Back What You Play
When SMF music file is loaded into the AT-90S/80S/
60S, it will be stored in the following tracks.
Rhythm The Rhythm performance (channel 10)
Bass The Bass performance (channel 2)
Performance data other than the Rhythm
Accomp
and Bass (except channels 2 and 10)
7.
Select the panel settings needed for recording the
performance.
8.
Touch the <Bwd> button and <Fwd> button to
move to the measure at which you wish to begin
recording.
9.
In the Rec/Play screen, touch <Rec> to enter
recording-standby mode.
<Play> and unrecorded track buttons in the screen will
blink. The button indicators of tracks that are already
recorded will light.
Also, the panel Composer [Rec] button indicator will
light, and the [Play/Stop] button will blink.
You can also enter recording-standby mode by pressing the
Composer [Rec] button.
10.
In the Rec/Play screen, touch <Play> to begin
recording.
As you record, the music file that was loaded into the
AT-90S/80S/60S will play back.
11.
In the Rec/Play screen, touch <Stop> to stop
recording.
The track button for which performance data has been
recorded will be lit.
You can also start and stop recording by pressing the
Composer [Play/Stop] button.
The performance data you recorded can be saved on a floppy
disk (p. 139).
NOTE
Commercially sold music files can also be loaded into the
AT-90S/80S/60S, but for reasons of copyright protection,
cannot be saved in SMF format.
142
Max Max Max Max
Min Min Min Min
Deleting Performance Songs
Stored on Disk
You can delete a performance song that was saved onto a
floppy disk.
1.
Insert the floppy disk containing the performance
data into the disk drive.
2.
Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
3.
In the lower right of the screen, touch <Utility>.
The Utility screen appears.
4.
Touch <Save/Delete>.
The Song Save/Song Delete screen appears.
fig.07-31_50
5.
Touch < >< > to select the performance data
that you wish to delete.
6.
Touch <Delete>.
The confirmation message appears.
fig.07-
If you touch <Cancel> the performance data will not be
deleted.
7.
When you touch <OK> the performance data will
be deleted.
Harmony Intelligence