The "Ping" Wbm Menu - Siemens SCALANCE X-200 Operating Instructions Manual

Configuration / diagnostics using remote mechanisms
6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
Table 6- 15
Command
info
ip [IP address]
subnet [subnet mask]
gateway [IP address]
dhcp [E ¦ D]
dhcptype [M ¦ N ¦ C ¦ D]
clientid [client ID]
6.3.5.17

The "Ping" WBM menu

Reachability of an address in an IP network
The ping function in Web Based Management has exactly the same function as the terminal
function of the same name. It checks whether an address exists in an IP network.
IP address
Enter the IP address of the network device you want to ping to test whether it can be
reached.
Repeat
Here, enter the number of data packets to be sent.
Ping
Click this button to start sending the data packets.
Ping Output
This box shows the output of the ping function.
194
Agent Configuration - CLI\AGENT\IP>
Description
Displays information on the IP settings.
Specifies the IP address. DHCP is disabled.
Specifies the subnet mask.
Specifies the IP address of the default IP
gateway.
Enables / disables DHCP.
Specifies the DHCP parameters:
- M MAC address
- N system name
- C client ID
- D PNIO device name
Specifies the DHCP client ID.
Comment
Administrator only.
Administrator only.
Administrator only.
Administrator only.
Administrator only.
Administrator only.
Operating Instructions, 12/2011, A5E00349864-19
SCALANCE X-200