Scalance X201-3P Irt Pro Tp Interfaces - Siemens SCALANCE X-200 Operating Instructions Manual

3.22.2

SCALANCE X201-3P IRT PRO TP interfaces

Connector pinout
On the SCALANCE X201-3P IRT PRO, the TP interface is implemented as RJ-45 ports with
MDI-X assignment (Medium Dependent Interface Crossover) of a network component.
Figure 3-38
Table 3- 22
Pin number
Pin 8
Pin 7
Pin 6
Pin 5
Pin 4
Pin 3
Pin 2
Pin 1
NOTICE
TP cords or TP-XP cords with a maximum length of 10 m can be connected to the RJ-45
TP port.
With the IE FC cables and IE RJ45 Plug PRO 180, an overall cable length of a maximum of
100 m is permitted between two devices depending on the cable type.
SCALANCE X-200
Operating Instructions, 12/2011, A5E00349864-19
RJ-45 jack
Pin assignment
Product properties
3.22 SCALANCE X201-3P IRT PRO
Assignment
n. c.
n. c.
TD-
n. c.
n. c.
TD+
RD-
RD+
103