Siemens 2000592-001 User Manual page 12

Overview,
Continued
Figure 1-1: Advance
Communication System
(ACS)
Advance
Communications
System
Advance Optichrom
GC's
2 • Installation
Figure 1 shows Advance Maxum and Advance Optichrom GC's
communicating on an ACS via a DataNET link.
APC
Advance Personal
Computer
PCI
AA AA
IOU(s)
The Advance Communication System (ACS) is a high-speed
communications system that uses TCP / IP protocols and addressing to
interconnect chromatographs and other process analyzers in a common
network. Figure 1-1 shows the Advance DataNET Hub (DNH), Advance
Network Access Unit (NAU) and Advance Network Gateway (ANG)
connected to the ACS. The NAU connects to the ACS and provides a
method to access information coming from Advance process analyzers
including Advance Maxum and Advance Optichrom GC's. The ANG is
used to connect Siemens' equipment residing on an Advance Data
Hiway to the ACS.
Advance Optichrom Service Panels and older APC workstations can
display Advance Maxum GC information over the Gateway link. They
are, however, limited to only accessing and changing basic operational
status. This data includes alarms, run/hold/calibrate, view, analysis
results etc.
NAU
Advance Network
Access Unit
AA
Applied Aut oma tion
AA
Applied Aut oma tion
ANG
Advance Network
Gateway
Workstation
DNH
Advance DataNET
Hub
AA Applied Aut oma tion AA
Applied Aut oma tion
Advance Maxum
Advance Maxum
2000592-001