Table of Contents
Advertisement
F
1
Knobs
Dashboard
• Snap the shift lever, key assembly and knobs into the
dashboard, as shown.
2
Microphone
Oval Hole
Plastic Tip
• Insert the end of the microphone cord through the small
round hole in the dashboard.
• Bend the the plastic tip at the end of the microphone
cord so that it forms a "T" behind the dashboard.
• Pull gently on the microphone cord to make sure it is
secure in the dashboard.
• Fit the tab on the back of the microphone into the oval
hole in the dashboard to hang it on the dash.
Assembly
Do Not Omit Any Steps
Shift
Lever
Key Assembly
"T" End
Round Hole
3
Vehicle
Body
• Fit the dashboard on the vehicle body.
• Insert four #8 x
3
/
" screws through the holes in the dash-
4
board and into the vehicle body.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
4
Front Wheel
• Slide the front wheels off the front axles.
10
Dashboard
Front Axle
Advertisement
Table of Contents
