Table of Contents
Advertisement
WARNING
Children can be harmed by small parts,
sharp edges and sharp points in the vehicle's
unassembled state, or by electrical items.
Care should be taken in unpacking and
assembly of the vehicle. Children should not
handle parts, including the battery, or help in
assembly of the vehicle.
1
• Fit both tabs on the front end of the seat into the slots in the vehicle.
H4435pr-0923
ASSEMBLY
Seat Tabs
Slots
• Position the roll bar so that it bends toward the back end of
• Insert and "snap" the roll bar into the large holes in the top side of
• Pull up on the roll bar to be sure it is secure.
2
• Insert a #10 x 1" screw into the back edge of the seat. Tighten
the screw.
Hole
3
the vehicle.
the vehicle, as shown.
#10 x 1" Screw
Roll Bar
Hole
H4435pr-0922
F
9
Advertisement
Table of Contents
