Assembly - Fisher-Price POWER WHEELS THE HOME DEPOT MIGHTY LOADER Owner's Manual With Assembly Instructions

73268pr-0920 HDepot.qrk 6/29/01
F
WARNING
Children can be harmed by small parts,
sharp edges and sharp points in the
vehicle's unassembled state, or by electrical
items. Care should be taken in unpacking
and assembly of the vehicle. Children
should not handle parts, including the
battery, or help in assembly of the vehicle.
1
Logo
Vehicle Body
• With the Power Wheels
cage into a groove in the topside of the vehicle body.
• Push down firmly on the roll cage to "snap" it into place.
• Pull up on the roll cage to be sure it is secure.
• Repeat this procedure to assemble the other roll cage to
the vehicle body.
Plastic Retainer
2
• Turn the vehicle body upside down so that the bottom
faces you.
• Use safety scissors, cut the plastic retainer holding the
steering linkage in place.
• Throw away the plastic retainer.
10:56 AM Page 9
All manuals and user guides at all-guides.com

Assembly

Roll Cage
® logo facing out, insert a roll
Steering
Linkage
Crossbar
3
Steering
Linkage
Back View
• Push back the steering linkage back.
• Fit the crossbar into the groove near the back end of the
vehicle body.
Hint: You may need to adjust the steering linkage slightly to
fit the crossbar into the groove.
Rear Axle
4
Groove
Back View
• Fit the short end of a rear axle through the hole in the
steering linkage, crossbar and the vehicle body.
• Push the rear axle down until the long end fits into the
groove in the steering linkage.
Hint: You may need to tap the rear axle with a hammer to
completely fit the long end of the rear axle into the groove
in the steering linkage.
9
Groove
Crossbar
Short End
Steering
Linkage