Fisher-Price BARBIE BEACH RANGER 78477 Owner's Manual & Assembly Instructions page 19

28
Canopy Sleeves
Canopy
Sport Bar
• Position the sport bar on its side so that the sport bar
ends curve away from you.
• Position the canopy opposite the sport bar with the
netting facing away from you.
• Slide the four canopy sleeves onto the sport bar.
29
Sport Bar
• Extend the canopy completely around the sport bar.
Assembly
Canopy
Sleeves
Canopy
19
30
Sport Bar Bracket
Ring
Tunnel
• Using safety scissors, remove the sport bar brackets from
the plastic connector. Dispose of the plastic connector.
• Position the sport bar upright.
• Fit a sport bar support through a tunnel in a rear corner
of the canopy. Make sure the ring end of the sport bar
support is positioned toward the sport bar.
• Position a sport bar bracket above one of the sport bar
side legs, as shown.
• Insert the tab on the inside of the sport bar bracket into
the hole in the sport bar side leg.
• Fit the ring on the sport bar support against the end of
the sport bar bracket.
• Fold the sport bar bracket over the sport bar to close it
around the sport bar and sport bar support.
31
• Insert a #6 x 1 1 / " screw into the sport bar bracket.
2
• Tighten the screw with a Phillips screwdriver. Do not
over-tighten.
• Repeat steps 30 and 31 to attach the other sport bar
support to the other sport bar side leg.
Tab
Hole
Side
Leg
Sport Bar
Support
Sport Bar
Bracket