Fisher-Price BARBIE BEACH RANGER 78477 Owner's Manual & Assembly Instructions page 15

13
Spacer Tube
• Fit a spacer tube between the grille and the
back of the brush guard, as shown.
• Insert a #8 x 4" screw through the brush
guard and spacer tube and into the hole in
the grille.
• Tighten the screw with a Phillips screwdriver.
Do not over-tighten.
• Repeat this procedure on the other side of
the grille.
14
Hood Latch
Hole
• Insert a hood latch into one of the holes in the vehicle
body, near the hood area.
• Twist the base of the hood latch
vehicle body.
• Repeat this procedure on the other side of the hood area
to attach the other hood latch to the vehicle body.
Assembly
Hood
Latch
1 / turn to secure it in the
4
15
15
• Fit the screw pegs on the windshield brackets into the
holes in the top surface of the dash. Press firmly to fit the
lip on each windshield bracket into the slot in the top of
the dash.
• Insert two #8 x 1" screws into a windshield bracket.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
• Repeat this procedure to assemble the other windshield
bracket to the vehicle body.
16
Slots
Tabs
• Align the slots in the front half of the windshield frame with
the tabs on the windshield brackets.
• Fit the front half of the windshield frame onto the
windshield brackets as shown.
Windshield
Brackets
Lip of
Bracket
Slot
Windshield Frame -
Front Half