Table of Contents
Advertisement
12. Option Setup
The [Option] dialog box is used for various setups of the VN-S400.
To display the [Option] dialog box, open the [Setting] menu and select [Option].
After completing setups, click on the [OK] button to close the [Option] dialog box.
12-1. Setting the Tree View Area Layout
Click on the [Display Tag] in the [Option] dialog box.
[Tree View Area Layout]
Select the display position of the Tree View Area Layout.
Displays an oblong (in the vertical direction) Tree View Area Layout at the
left-hand side.
12-2. Setting the View Window Highlight Frame Colors
Click on the [Display] tab in the [Option] dialog box.
[Highlight Frame]
If checked, a frame is displayed around the active View Window.
[Thickness]
Specify the line thickness of the frame around the active View
Window.
[Active Frame Color]
Specify the color of the frame around the active View Window.
[Alarm 1]
Specify the color of the frame around the View Window receiving Alarm 1.
(To display a color frame around a View Window receiving an alarm, it is required to select [Highlight] in section
11-2, "Setting the Operation Upon Alarm Reception" and specify enhancement of the View Window.)
[Alarm 2]
Specify the color of the frame around the View Window receiving Alarm 2.
(To display a color frame around a View Window receiving an alarm, it is required to select [Highlight] in section
11-2, "Setting the Operation Upon Alarm Reception" and specify enhancement of the View Window.)
[Alarm 3/Motion Detect]
Specify the color of the frame around the View Window receiving the Alarm 3/Motion Detect alarm.
Displays an oblong (in the horizontal direction) Tree View Area
Layout at the bottom.
25
Advertisement
Table of Contents
