Table of Contents
Advertisement
12-4. Setting the Password for the Work Space
Click on the [Password] tab in the [Option] dialog box.
If [Work Space Password Enable] is checked, the user has to enter the password to open the work space.
[Setting password]
Default Password:
Re Type:
[Modifying password]
To modify the previously set password or login name, enter a new password or login name and click on the [Up-
date] button.
12-5. Setting the E-Mail Sending Address Upon Alarm Reception
Click on the [Mail] tab in the [Option] dialog box.
When E-mail notice is selected as an operation upon alarm reception, the E-mail is sent to the address specified
under this tab.
(For the alarm, see chapter 11, "Alarm Setup.")
SMTP Server name: Specify the SMTP server name.
Port Number: Specify the port number.
From Address: Specify the mail sender address.
To Address: Specify the mail destination address.(One address only)
CC: Specify the mail address for CC.(One address only)
BCC: Specify the mail address for BCC.(One address only)
Subject: Specify the subject of the sent mails.
Enter the password within 8 characters.
Enter the password again.
27
Advertisement
Table of Contents
