Chapter 1 Quick Operation Guide; Have You Completed The Camera Setup; Installation; Starting The Application - JVC GV-LS2 User Manual

Chapter 1 Quick Operation Guide

1. Have You Completed the Camera Setup?

Camera setup must be performed before JVC CAM Control is used.
Be sure to check that the camera video and audio can be played from the Web browser
before proceeding to the next step.
For details on setting up the camera, refer to the instruction manual supplied with the camera.

2. Installation

Install using the CD-ROM supplied with the camera.
Insert the CD-ROM into the computer drive, and run setup.exe
from the drive.
[Caution]
An update may have been released for the application, so
check the support web page before installing.
http://loilo.tv/product/32/

3. Starting the Application

After the application installation is completed, two icons are
displayed on the Windows desktop. Click the JVC CAM Control
icon shown in the illustration.

4. Registering the Camera to Use

The application starts.
On the right side of the display, the cameras in your
network are listed. From the listed cameras, click the
camera you want to use.
A login screen is displayed. Log in to the camera using
the username and password that you set in the camera
setup.
[Caution]
To prevent video from being leaked accidentally to
third parties, be sure to change the username and
password that are set when the camera is shipped.
For details on changing the username and password,
refer to the instruction manual supplied with the
camera.
1