Table of Contents
Advertisement
4-2. Opening a Live View Window
1
Open the [Insert] menu and click on [View Window].
2
'New View Window' dialog box appears, enter the name of the new View Window within 32 characters and
click [Register].
A Live View Window appears and the icon for the Live View Window is added in the Tree View Area Layout.
Up to 16 view windows may be registered using the same procedure as above.
4-3. Registering a View Point
1
Open the [Insert] menu and click on [View Point].
The [New View Point] dialog box appears.
2
Click on [Register] to register the selected view point. The icons for the view point and the view channel are
added in the view point display section of the Tree View Area Layout.
Up to 256 view points may be registered using the same procedure as above.
[IP Address]
Enter the IP address of the view point (connected device to be regis-
tered).
[Multi Register]
View Points having continuous IP addresses can be registered by one
time. Check [Multi Resister] and enter the starting IP address and
ending IP address in the [IP Address] boxes.
[View Point Name]
The name of a View Point being handled on the VN-S400U can be
decided as required within 32 characters.
[View Point Type]
Select [Auto] in usual use. Select [Unknown] if the device of View Point
is not in connectable condition. In this case, this View Point will be
connected automatically when the Work Space is opened next time.)
10
Click to change the View Window name.
(When the lower directory level is not
displayed as shown in the figure, it can be
displayed by clicking on the [+] at the left of
the icon.)
View Point
View Channel
Advertisement
Table of Contents
