Before You Start Playing; Connecting The Pedalboard; Using The Music Rest; Placing The Bench - Roland Classic C-380 Owner's Manual

Before You Start Playing

Connecting the Pedalboard

* The illustration shows the C-330, but the connections are the same
for the C-380 as well.
1.
Adjusting the pedalboard adjuster.
Turn the pedalboard adjuster (four locations) to lower it until the
pedalboard does not wobble.
* If there is a gap between the pedalboard and the floor, the
pedalboard may be damaged.
* In particular when placing the instrument on carpet, adjust this so
that the pedalboard firmly contacts the floor.
2.
Connect the cable extending from the bottom of the
main unit to the PEDAL OUT jack of the pedalboard.
3.
Place the pedalboard.
Place the pedalboard so that it contacts the organ.
Adjuster
Please don't get your
fingers pinched.
Please don't get your
fingers pinched.

Using the Music rest

1.
Gently raise the music rest, then secure it in place as
shown in the figure.
Metal Fittings
2.
To collapse the music rest, fold in the metal fittings while
supporting the music rest with both hands and gently
fold down the music rest.
Do not pull down the music stand.

Placing the Bench

* The illustration shows the C-330, but the connections are the same
for the C-380 as well.
1.
Place the organ bench over the pedalboard.
As shown in the illustration, position the bench so that the side with
the footrest faces the organ, taking care that the footrest does not
touch the pedalboard.
Turn the bench adjusters (four locations) to lower them, adjusting
the height so that the bench does not wobble.
Do not adjust the adjusters more than 25 mm (1 inch) from the
floor.
Please don't get your
fingers pinched.
less than
25 mm
(1 inch)
Adjuster
19