Practicing Along with a Preset Song or Performance Data
You can practice by playing along with preset songs (demo songs) that are built into the organ, or with performance data that you've
recorded from your own playing (p. 56).
• You can mute (silence) the performance of a specific division (p. 52).
• You can listen to the performance of a specific division as a guide tone (p. 53).
• You can change the tempo of the song.
• When a song is played back, the registrations that were used at the time it was recorded will automatically be called up. If you wish to
preserve the current overall status of the organ, make sure to save your settings to a memory piston beforehand (p. 47).
• Playback will use the currently specified reverb (p. 34), temperament (p. 38), and pitch (p. 39) settings.
• Songs can also be played back in succession. Start from the state where playback is stopped. Then, using the [Select/Menu] knob, select
"Play Mode." Next, turn the [Value/Exit Menu] knob to change the setting to "CHAIN."
Setting
OFF
CHAIN
Selecting and Playing Back a Song
fig.rec-play-2.eps
1.
If you want to play back a song from USB memory, connect your USB memory to the external memory connector
(p. 26).
2.
From the main screen, press the [STOP] piston to access the "Song Recorder" screen.
fig.LCD034.eps
3.
Turn the [Select/Menu] knob to select the media type field in the upper right.
fig.LCD033.eps
50
Explanation
Play back only the selected song
Consecutively play back all the songs on the selected media