Playing Back A Specific Division As A Guide Tone - Roland Classic C-380 Owner's Manual

Playing Back a Specific Division as a Guide Tone

1.
From the main screen, press the [STOP] piston to access the "Song Recorder" screen.
2.
Choose the song that you want to play back (p. 50).
3.
Turn the [Select/Menu] knob to select "Division Mute."
fig.LCD035.eps
4.
Press the [Select/Menu] knob to access the "Division Mute" screen.
5.
Turn the [Select/Menu] knob to select the division that you want to play back as a guide tone.
6.
Turn the [Value/EXIT MENU] knob to change the setting from "PLAY" to "GUIDE."
fig.LCD037.eps
7.
Turn the [Select/Menu] knob to select the "Guide Volume."
8.
Turn the [Value/EXIT MENU] knob to adjust the volume of the guide tone.
Setting
1–10
9.
Turn the [Select/Menu] knob to select the "Guide Tone."
10.
Turn the [Value/EXIT MENU] knob to select the guide tone.
You can choose one of the following nine types of tone for the guide tone.
Setting
F16, P16, R16, F8, P8, R8, F4, P4, R4
11.
Press the [PLAY/PAUSE] piston to play back.
The division for which you selected "GUIDE" will play back using the specified guide tone.
* When you reselect the performance data, all divisions will sound using their original tone.
These settings will return to the default value when you turn off the power, but you can store the Guide volume and the
Guide Tone setting so that it will be remembered even after the power is turned off.
For details, refer to "Storing Your Settings (Customize)" (p. 73).
Practicing Along with a Preset Song or Performance Data
Explanation
F: Fluite
P: Principal
R: Reed
Number: Footage
53