Exchanging Data With Another Part (Exchange); Editing A Song In More Detail (Song Microscope) - Roland PRELUDE MUSIC KEYBOARD 2 Supplementary Manual

The performance data of the selected Source part will be lost.
Data such as Program Changes will also be merged, so if the
Source Part and Destination Part are using different Tones, the
data resulting from the merge might not be played by the Tone
you intend.
3. Select "EXECUTE" and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
Exchanging data with another part
(Exchange)
This function exchanges the performance data between two
specified parts of the same Song.
1. In the "Song Edit Menu," select "12. Exchange" and press
[ENTER].
The SONG EDIT EXCHANGE screen will appear.
2. Use [ ] [ ] [ ] [
parameter that you want to change, and use the VALUE
dial to make the desired settings.
Parameter Value
PART A 1–16
PART B 1–16
3. Select "EXECUTE" and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
] to move the cursor to the
Explanation
Selects one of the Song parts to
exchange.
You can't select the same part
as PART B.
Selects the other Song part to
exchange.
You can't select the same part
as PART A.
Editing a song in more detail
(SONG MICROSCOPE)
This lets you edit individual MIDI events of the Song data.
You can individually edit the following items.
• An event's position
• Note number
• Note gate time
• Note-on velocity
1. Select the Song that you want to edit (p. 29 in the owner's
manual).
2. Press [PART VIEW] so the button is lit.
The SONG TRACK screen will appear.
3. Use [ ] [ ] [ ] [
"MICRO" and press [ENTER].
The SONG MICROSCOPE screen will appear.
1
1
1. Measure: Beat: Tick
2. Bank select MSB/value
Bank select LSB/value
Program change number/value
3. Controller number/value
4. Pitch bend
5. Note: Note number/Velocity/Gate time (Beat: Tick)
4. Use the VALUE dial or [
you want to edit.
Creating a new song
• Controller number
• Controller value
• Program change number
• Pitch bend value
] to move the cursor to
2
4 3
5
] [ ] to select the event that
39