Replacing Performance Data (Global Change) - Roland PRELUDE MUSIC KEYBOARD 2 Supplementary Manual

Parameter Value
-1920–1920
Bias (TICK)
(TICK)
Magnify 0–200%
Note C–(Note Range
Range Min
Max value)
Note (Note Range
Range Max
Min value)–G9
3. Select "EXECUTE" and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
Replacing performance data
(Global Change)
This function replaces the specified MSB, LSB, and PC values
with different MSB, LSB, and PC values. You can also apply a
relative adjustment to the control values (Expression, Panpot,
Reverb, Chorus) within the Style.
1. In the "Style Edit Menu," select "9. Global Change" and
press [ENTER].
The STYLE EDIT GLOBAL CHANGE screen will appear.
2. Use [ ] [ ] [ ] [
parameter you want to change, and use the VALUE dial to
make the desired setting.
Parameter Value
ADrum,
PART
ABass,
Acc1–6, ALL
CHORD Maj, min, 7th
INT1–4,
MAIN1–4,
DIVISION
FILL1–4,
END1–4
Explanation
Specifies the amount by
which the gate times are
to be modified, in units of
a tick.
Specifies the ratio by
which the gate times will
be modified.
Specifies the lowest pitch
whose gate times are to
be modified.
Specifies the highest
pitch whose gate times
are to be modified.
] to move the cursor to the
Explanation
Selects the Style part whose
data values you want to
modify.
Selects the chord.
Selects the division.
Parameter Value
MSB OFF, 0–127,
(FROM)
ALL
MSB (TO) OFF, 0–127
OFF, 0–127,
LSB (FROM)
ALL
LSB (TO) OFF, 0–127
OFF, 1–128,
PC (FROM)
ALL
PC (TO) OFF, 1–128
EXPRESS -127–127
PANPOT
-127–127
REVERB -127–127
CHORUS
-127–127
3. Select "EXECUTE" and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
Creating a new Style
Explanation
Specifies the MSB value that
is to be changed.
By choosing ALL, you can set
more than one Style part to
the same value.
Specifies the new MSB
value.
Specifies the LSB value that is
to be changed.
By choosing ALL, you can set
more than one Style part to
the same value.
Specifies the new LSB value.
Specifies the PC value that is
to be changed.
By choosing ALL, you can set
more than one Style part to
the same value.
Specifies the new PC value.
Adjusts the Expression
values.
Adjusts the Panpot values.
Adjusts the Reverb values.
Adjusts the Chorus values.
19