Introduction; Specifications - Jet JDP-17MF Operating Instructions And Parts Manual

Introduction

This manual is provided by Walter Meier (Manufacturing) Inc., covering the safe operation and
maintenance procedures for a JET Model JDP-17MF Drill Press. This manual contains instructions on
installation, safety precautions, general operating procedures, maintenance instructions and parts
breakdown. This machine has been designed and constructed to provide years of trouble free operation if
used in accordance with instructions set forth in this manual. If there are any questions or comments,
please contact either your local supplier or Walter Meier. Walter Meier can also be reached at our web
site: www.waltermeier.com.

Specifications

Stock Number .......................................................................................................................... 354169
Swing........................................................................................................................................ 16-1/2"
Type ............................................................................................................................................ Floor
Drilling Capacity.............................................................................................................................. 5/8"
Chuck Size ..................................................................................................................................... 5/8"
Spindle Travel ............................................................................................................................. 4-3/8"
Spindle Distance to Base ................................................................................................................. 49"
Spindle Distance to Table (max.) ................................................................................................ 29-1/8"
Table Size Diameter .................................................................................................................. 13-3/4"
Table Tilt ................................................................................................................................ + or - 45
Spindle Taper ............................................................................................................................... MT-2
Column Diameter......................................................................................................................... 3-1/8"
Number of Spindle Speeds ................................................................................................................ 16
Range of Spindle Speeds .............................................................................................. 200-3,630 RPM
Overall Height ................................................................................................................................. 66"
Base Size.................................................................................................................... 12-1/2" x 19-5/8"
Motor ..................................................................... TEFC, 3/4HP, 1 Ph, 115/230V, prewired 115V, 60Hz
Net Weight (approx.) ...................................................................................................................189 lb.
Shipping Weight (approx.) ...........................................................................................................200 lb.
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Walter Meier reserves the right to change specifications at any time and without
prior notice, without incurring obligations.
9