Adjusting pattern balance
If the decorative stitch patterns, letters , numbers or
manual buttonhole stitches are uneven when you sew on a
particular fabric, adjust them with the feed balancing dial.
q Feed balancing dial
w Standard setting mark
e Indication line
* The machine comes with the feed balancing dial set in
the position as shown.
Adjusting distorted stretch stitch patterns
If the patterns are uneven when sewing with a particular
fabric, adjust them by turning the feed balancing dial with a
coin.
When patterns are too compressed, correct by turning the
dial in the direction of "+".
When patterns are too drawn out, correct by turning the
dial in the direction of "–".
Adjusting distorted letters or numbers
If the letters are uneven when sewn on a particular fabric,
select pattern 8 to test the stitch then turn the feed
balancing dial with a coin.
When the letters or numbers overlap, turn the dial in the
direction of "+".
When the letters or numbers are too drawn out, turn the
dial in the direction of "–".
46
q
w
e