Auto-Lock Stitch; Saddle Stitch; Zigzag Stitch; To Change The Width And Length - Janome Sewing Machine Instruction Book

Auto-lock stitch

q Stitch pattern:
w Needle thread tension:
e Presser foot:
r Presser foot:
Lower the needle close to the front edge of the fabric and
lower the presser foot. The machine will sew several
locking stitches in place and continue sewing forward.
By pressing the reverse button, the machine will sew
several locking stitches in place, then stop sewing
automatically.
NOTE:
When using the straight stitch foot, make sure to use
center needle position. Otherwise the needle may strike
the sewing foot and possibly break.

Saddle stitch

q Stitch pattern:
w Needle thread tension:
e Presser foot:
r Presser foot:
This saddle stitch is formed with one stitch forward, two
stitches backward, and a fourth stitch forward.
You can achieve a lovely hand-worked look when
topstitching suits, blazers, jumpers, and denim outfits with
the saddle stitch.
NOTE:
When using the straight stitch foot, make sure to use
center needle position. Otherwise the needle may strike
the sewing foot and possibly break.

Zigzag stitch

q Stitch pattern:
w Needle thread tension:
e Presser foot:
r Pre-programmed settings

• To change the width and length

Zigzag stitch is useful for overcasting, applique, mending
etc. When you change the zigzag width, make sure the
needle position is above the fabric.
z When you select the stitch, display shows
pre-programmed stitch length and width settings r.
Press the zigzag width key "+", "–" or stitch length key
"+", "–" to change the stitch width and length manually.
x When the "+" or "–" key is pressed, the width and length
will be changed accordingly.
q Narrow width (small number)
w Wide width (large number)
e Dense stitch (small number)
r Coarse stitch (large number)
t Width
y Length
10
2 to 6
Zigzag foot: A
Straight foot: H
35
3 to 6
Zigzag foot: A
Straight foot: H
04
3 to 7
Zigzag foot* A
q
q
q
z x
q w
t
25
w e
w e
w e
e r
r
r
r
y