Inserting The Bobbin - Janome Sewing Machine Instruction Book

• Inserting the bobbin

q End of thread
w Notch
e Notch
r Threading diagram
z Place a bobbin in the bobbin holder with the thread
running off counterclockwise.
x Guide the thread into the first notch w on the front side
of the bobbin holder. Draw the thread to the left, sliding it
between the tension spring blades.
c Continue to draw the thread lightly until the thread slips
into the second notch e. Pull out about 6˝ (15 cm) of
thread.
v Attach the hook cover plate. Check the threading by
referring to the diagram r shown on the hook cover plate.
z
q
x
c
e
v
15
w
r