Figure 2 MPIO Properties page with Discover Multi-Paths tab enabled
To enable multipath support for the listed devices, select a Device Hardware ID, and click Add.
All devices with this hardware ID are handled by a DSM (either a vendor-supplied DSM or MS DSM).
DSM Install
In the MPIO Properties page, click the DSM Install tab. This tab enables you to install a vendor-supplied
DSM. While installing a DSM, you must specify the driver path, the INF file name, and the DSM
Hardware ID.
Figure 3
shows the MPIO Properties page with the DSM Install tab enabled.
43
HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 3.00.00