Hpdsm Notify; Notification Strings - HP MPIO Installation And Reference Manual

hpdsm cleanup device=1
Device Name
Device Serial No.
Cleanup the failed path information for this LUN (y/n)?
Cleanup Succeeded.
Example:
hpdsm cleanup device=all
Successful for all the devices.

hpdsm notify

Syntax: hpdsm notify event=notification_event_number time=number_of_minutes
The hpdsm notify command defines user notification of events. The time attribute defines the number
of minutes that will elapse from the time the event occurs until the user is notified. The maximum value
that can be entered is 35000 minutes.
NOTE:
Syntax: hpdsm notify event=notification_event_number
The above command will make the notification to wait indefinitely until the user terminates the wait
(eg: with Ctrl-C).
Table 3 defines the selections for the notification command string.
Table 3 Notification strings
Notification string
HPDSM_NEW_DEVICE
HPDSM_ADDITIONAL_PATH
HPDSM_MAX_PATH_REACHED
HPDSM_LAST_PATH_FAILURE
HPDSM_PATH_FAILOVER
HPDSM_MAX_LUNS_REACHED
HPDSM_ALL_NOTIFICATIONS
The above notifications are sent by the HP MPIO EVA DSM and MPIO framework to the CLI. The CLI
displays the event in the command window as shown in the following example.
: HP HSV210
: 600508B400101F6A000070001D950000
Verify by issuing "hpdsm devices" command.
Verify by issuing "hpdsm devices" command.
Notification_ event_
1
2
3
4
5
6
7
HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 3.00.00
Notifies the user when DSM:
number
Detects a new device.
Detects a redundant path to an existing
device.
Determines that a device configuration
contains the maximum number of
supported paths.
Detects that the last path to the device
is removed.
Detects an existing path to a device
has failed and an alternate path is
being used.
Determines that the configuration
contains the maximum number of
supported LUNs.
Detects any event related to MPIO
framework and DSM occurs.
y
31