Upgrading Hp Mpio Eva Dsm; Removing Hp Mpio Eva Dsm; Creating Response Files For Silent Mode Operations - HP MPIO Installation And Reference Manual

• To install into the user specified directory for both 32 and 64 bit systems, in lines 27 and
32 of the setup.iss file, replace szDir = <Default_Target_Dir> with szDir =
<User_Target_Dir>.
4.
Choose one of the following options:
• To install the Microsoft MPIO Framework component along with the DSM component, use the
renamed default setup.iss file.
• To install only the DSM component (when the Microsoft MPIO Framework already exists on
your system), edit the renamed default setup.iss file as follows:
a.
In line 34, replace Component-count=2 with Component-count=1.
b. Remove line 35.
c.
In line 36, replace Component-1=DSM with Component-0=DSM.
5.
If you want to avoid the automatic reboot feature, edit the setup.iss file as follows:
a. In line 50, replace Result=6 with Result=1.
b. In line 51, replace BootOption=3 with BootOption=0.

Upgrading HP MPIO EVA DSM

To upgrade from a previous version of HP MPIO EVA DSM to the current version, complete the steps below:
1.
Make a copy of the update.iss file in the installation kit.
2.
Rename this copy of the file as setup.iss
3. Choose one of the following options:
• To upgrade the Microsoft MPIO Framework component along with the DSM component,
use the renamed default setup.iss file.
• To upgrade only the DSM component (when the Microsoft MPIO Framework already exists
on your system), edit the renamed default setup.iss file as follows:
a.
In line 23, replace Component-count=2 with Component-count=1.
b. Remove line 24.
c.
In line 25, replace Component-1=DSM with Component-0=DSM.
4.
If you want to avoid the automatic reboot feature, edit the setup.iss file as follows:
a. In line 39, replace Result=6 with Result=1.
b. In line 40, replace BootOption=3 with BootOption=0.

Removing HP MPIO EVA DSM

To remove HP MPIO EVA DSM, complete the steps below:
1.
Make a copy of the uninstall.iss file in the installation kit.
2. Rename this copy of the file as setup.iss
3.
If you want to avoid the automatic reboot feature, edit the renamed setup.iss file as follows:
a.
In line 28, replace Result=6 with Result=1.
b. In line 29, replace BootOption=3 with BootOption=0.
Creating response files for silent mode operations
The package contains the following response files (.iss files): new.iss, uninstall.iss and
update.iss that are used for silent mode installation, uninstallation and update respectively. In addition
to these, you can create your own customized response files for operations (such as modify/repair) with
different combinations of the components selected/unselected.
Customized response files can be created by running the setup.exe in the record mode on one
of the systems. This response file can then be used for doing the same silent mode operation across
multiple systems.
To create response file, complete the following steps:
HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 3.00.00
17