Limitations; Before You Begin - HP Data Protector A.06.11 Integration Manual

• For information on installing, configuring, and using Exchange Server, see
the Exchange Server documentation.
• Ensure that you correctly installed Data Protector. For information on installing
Data Protector in various architectures and installing the Data Protector Exchange
Server integration, see the HP Data Protector installation and licensing guide.
Every Exchange Server system to be used with Data Protector must have the MS
Exchange Integration component installed.

Limitations

• Due to incompatibility between Microsoft Exchange Server 2007 and earlier
Exchange Server versions, Exchange Server 2007 backup objects cannot be
restored to Data Protector clients on which an earlier Exchange Server version is
installed, and vice versa.

Before you begin

• Configure devices and media for use with Data Protector. See the online Help
index: "configuring devices" and "creating media pools" for instructions.
• To test whether Exchange Server and Cell Manager communicate properly,
configure and run a Data Protector filesystem backup and restore. See the online
Help for instructions.
• Before performing incremental backups, disable circular logging for all storage
groups.
If the application is cluster-aware, disable circular logging on all cluster nodes.
• Add the Exchange_home\bin directory to the Windows Path environment
variable:
1. In the Windows Explorer, right-click My Computer and click Properties.
2. In the Properties dialog box, click Advanced and then Environment Variables.
3. Select Path in the System Variables list and click Edit.
4. Add Exchange_home\bin in the Variable Value text box and click OK.
See Figure
If the integration is cluster-aware, perform this procedure on all cluster nodes.
100 Integrating Microsoft Exchange Server and Data Protector
29.