Table of Contents
Advertisement
Monitoring Hardware Components
Adapters
ServerNet Addressable Controllers (SACs)
Logical Interfaces (LIFs)
Filters
Physical Interfaces (PIFs)
The following commands describe how to obtain the status of SACs, adapters, LIFs, and
PIFs. For more information on the ServerNet LAN subsystem, see the LAN
Configuration and Management Manual.
To check the status of a SAC, enter:
> SCF STATUS SAC sac-name
A listing similar to this is sent to your home terminal:
->STATUS SAC $ZZLAN.E4SA1.O
SLSA Status SAC
Name
$ZZLAN.E4SA1.0
To check the status of an adapter, enter:
> SCF STATUS ADAPTER adapter-name
A listing similar to this is sent to your home terminal:
->STATUS ADAPTER $ZZLAN.E4SA1
SLSA Status ADAPTER
Name
$ZZLAN.E4SA1
To check the status of a LIF, enter:
> SCF STATUS LIF lif-name
A listing similar to this is sent to your home terminal:
->STATUS LIF $ZZLAN.LAN0
SLSA Status LIF
Name
$ZZLAN.LAN0
To check the status of a PIF, enter:
> SCF STATUS PIF pif-name
Owner
State
1
STARTED
State
STARTED
State
Access State
STARTED
Guardian User's Guide —425266-001
19 -17
Checking ServerNet LAN Subsystem Status
UP
Advertisement
Table of Contents
