HP Guardian User Manual page 387

Monitoring Hardware Components
If you enter the command:
> SCF STATUS DISK $DATA00-*
you see a report such as the one shown:
STORAGE - Status DISK \ALM171.$DATA00-*
LDev Path
6 PRIMARY
6 BACKUP
6 MIRROR
6 MIRROR-BACKUP
This report shows that $DATA00:
Is a mirrored volume (primary and mirror paths)
Has a mirror disk that is being revived (SubState REVIVE)
The data shown in the report means:
LDev
Path
PathStatus
State
SubState
Primary PID
BPID
Other common disk-monitoring operations such as checking disk free space with the
Disk Space Analysis Program (DSAP) are included in
Disk Operations.
Examples: STATUS DISK Command
To display the summary status of the disk $DATA00, enter:
-> STATUS $DATA01
34-> STATUS $DATA01
STORAGE - Status DISK \SHARK.$DATA01
LDev Primary
63 *STARTED
PathStatus State
ACTIVE STARTED
INACTIVE STARTED
ACTIVE STARTING
INACTIVE STARTING
The logical device number
The disk path assignment
The status of the disk path; whether the disk path is the current path
(ACTIVE) or not (INACTIVE)
The current SCF state of the disk path
The current SCF substate of the disk path
The primary CPU number and process identification number (PIN) of the
specified device
The backup CPU number and process identification number (PIN) of the
specified device
Backup Mirror
STARTED *STARTED
Guardian User's Guide —425266-001
SubState
REVIVE
REVIVE
Section 9, Performing Routine
MirrorBackup
STARTED
19- 9
Checking Disk Status
Primary Backup
PID PID
0,10 1,10
0,10 1,10
0,10 1,10
0,10 1,10
Primary Backup
PID PID
0,267 1,266