3003: Zpwy-Err-Tcp-Badindex; 3004: Zpwy-Err-Tcp-Badrecovery; 3005: Zpwy-Err-Tcp-Badpuparams - HP NonStop Pathway/iTS Programming Manual

Management programming manual
Table of Contents

Advertisement

TCP Error Messages
This error does not appear in the RETCODE token or in an error list; it appears only in
response to a STATUS TCP or STATUS TERM command.
Effect. The terminal is aborted; the operation fails.
Recovery. Isolate and correct the problem within the SCREEN COBOL program. For
instructions on how to locate the problem within the program, see
Information for Terminal Errors

3003: ZPWY-ERR-TCP-BADINDEX

The value of a subscript expression is either 0 or larger than the limit implied by the
OCCURS clause.
This error does not appear in the RETCODE token or in an error list; it appears only in
response to a STATUS TCP or STATUS TERM command.
Effect. The TERM is aborted; the operation fails.
Recovery. Isolate and correct the problem within the SCREEN COBOL program. For
instructions on how to locate the problem within the program, see
Information for Terminal Errors

3004: ZPWY-ERR-TCP-BADRECOVERY

The TCP detected a SCREEN COBOL verb that is not allowed during screen recovery.
This error does not appear in the RETCODE token or in an error list; it appears only in
response to a STATUS TCP or STATUS TERM command.
Effect. The operation fails.
Recovery. Isolate and correct the problem within the SCREEN COBOL program. For
instructions on how to locate the problem within the program, see
Information for Terminal Errors

3005: ZPWY-ERR-TCP-BADPUPARAMS

The number of parameters passed in the USING clause of the CALL statement did not
equal the number of parameters given in the procedure division header of the called
program.
This error does not appear in the RETCODE token or in an error list; it appears only in
response to a STATUS TCP or STATUS TERM command.
Effect. The operation fails.
Recovery. Isolate and correct the problem within the SCREEN COBOL program. For
instructions on how to locate the problem within the program, see
Information for Terminal Errors
NonStop Pathway/iTS Management Programming Manual—426749-002
on page 12-3.
on page 12-3.
on page 12-3.
on page 12-3.
12- 4
Error-Message Range 3000 Through 3999
Additional
Additional
Additional
Additional

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents