Zpwy-Map-Par-Stats-Tcpterm; Zpwy-Map-Par-Stats-Term - HP NonStop Pathway/iTS Programming Manual

ZPWY-MAP- Definitions

ZPWY-MAP-PAR-STATS-TCPTERM

This token specifies whether the counters used for statistics measurements should be
set back to zero after returning the statistics data.
def ZPWY-DDL-PAR-STATS-TCPTERM.
02 ZRESETSTATS
end.
ZRESETSTATS
indicates whether to reset the statistics counters to zero. The following values are
possible:
ZPWY-VAL-NO
ZPWY-VAL-YES
If you do not assign a value to this field, the default is ZPWY-VAL-NO.

ZPWY-MAP-PAR-STATS-TERM

This token specifies whether the counters used for statistics measurements should be
set back to zero after returning the statistics data.
def ZPWY-DDL-PAR-STATS-TERM.
02 ZRESETSTATS
end.
ZRESETSTATS
indicates whether to reset the statistics counters to zero. The following values are
possible:
ZPWY-VAL-NO
ZPWY-VAL-YES
If you do not assign a value to this field, the default is ZPWY-VAL-NO.
NonStop Pathway/iTS Management Programming Manual—426749-002
token-type ZPWY-DDL-YES-NO.
Counters are not reset to 0.
Counters are reset to 0.
token-type ZPWY-DDL-YES-NO.
Counters are not reset to 0.
Counters are reset to 0.
6- 41
ZPWY-MAP-PAR-STATS-TCPTERM