HP NonStop Pathway/iTS Programming Manual page 238

TERM Commands
Tokens in Response Buffer
ZSPI-TKN-CONTEXT
ZPWY-MAP-SEL-TERM
ZPWY-MAP-STATS-TERM2
ZPWY-MAP-STATS-TERM1
Considerations
If the ZSTATS field in ZPWY-DDL-DEF-TCP has a value of ZPWY-VAL-OFF, the
TCP does not gather information for this command.
The information returned in the ZREQCNT and ZIOS subfields of ZREPLY (under
ZIOINFO) is the same as that returned under ZSEND, except:
If the reply contains an error, the number of I/O operations is counted for
ZSEND, but not for ZREPLY.
If there are SEND operations outstanding at the time this command is issued,
the value for ZSEND is greater than the value for ZREPLY.
The statistics returned for STATS TCP include values for both Slot 0 and Slot 1
information. The STATS TERM statistics include only the value for Slot 0; use this
value to determine the value for the ZMAXTERMDATA field in
ZPWY-DDL-DEF-TCP.
Either ZPWY-MAP-STATS-TERM1 or ZPWY-MAP-STATS-TERM2, but not both,
is present in the response buffer.
NonStop Pathway/iTS Management Programming Manual—426749-002
token-type ZSPI-TYP-BYTESTRING.
token-type ZPWY-DDL-SEL-TERM.
token-type ZPWY-DDL-STATS-TERM2.
token-type ZPWY-DDL-STATS-TERM1.
8- 28
STATS TERM