HP NonStop Pathway/iTS Programming Manual page 39

SPI Programming Considerations
Table 3-1. Pathway/iTS Programmatic Commands (page 2 of 2)
Command
ZPWY-CMD-DELETE
ZPWY-CMD-GETVERSION
ZPWY-CMD-FREEZESTATUS
ZPWY-CMD-INFO
ZPWY-CMD-INSPECT
ZPWY-CMD-REFRESHCODE
ZPWY-CMD-RESUME
ZPWY-CMD-STATS
ZPWY-CMD-STATUS
ZPWY-CMD-STOP
ZPWY-CMD-SUSPEND
ZPWY-CMD-SWITCH
ZPWY-CMD-TELL
These commands and the Pathway subsystem's responses to them are described in
Section 7, Terminal Control Process (TCP)
Section 9, PROG
Table 3-2 on page 3-6 lists the TS/MP commands that also affect Pathway/iTS objects.
These commands are documented in the TS/MP Management Programming Manual.
NonStop Pathway/iTS Management Programming Manual—426749-002
Meaning
Removes an object description from the PATHMON
configuration file if the object is not active
Obtains the version of an object
Obtains the FREEZE status of a TERM that is preventing
a server from being frozen
Obtains the configuration of an object
Invokes the HP Inspect debugging tool to debug a
SCREEN COBOL program running on a Pathway TERM
object
Causes the TCP to check for the currently active version
of called SCREEN COBOL programs
Restarts execution of a SCREEN COBOL program that
has been suspended with the SUSPEND command
Obtains resource usage and performance statistics for an
object
Obtains the current status of an object or LINKMON
process
Stops an object if the command is used after certain
conditions are met
Causes the TCP temporarily to suspend execution of a
SCREEN COBOL program on a TERM object
Exchanges the function of an object's primary process
with the function of its backup process
Displays an operator-supplied message on a TERM object
Commands; and Section 10, Tell Message
Commands; Section 8, TERM
3 -5
Commands
Commands;
Commands.