Tools Supplied With The Product; Door Key - McDATA Sphereon 4300 Installation And Service Manual

General Information
1
Tools Supplied with
the Product
McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
1-10
The following tools are supplied with the product:
• Door key - A door key with 5/16-inch socket
required to open front and rear doors of the Fabricenter
Equipment Cabinet. A 5/16-inch socket wrench may also be used.

Door Key

Figure 1-3
• Loopback plug - A multimode (shortwave laser) or singlemode
(longwave laser) loopback plug
perform port diagnostic tests. Loopback plugs are shipped with
the product, depending on the types of port transceivers installed.
Loopback Plug
Figure 1-4
• Fiber-optic protective plug - For safety and port transceiver
protection, fiber-optic protective plugs
all product ports without fiber-optic cables attached. Products are
shipped with protective plugs installed.
Fiber-Optic Protective Plug
Figure 1-5
(Figure 1-3) is
(Figure 1-4) is required to
(Figure 1-5) are inserted in