Back Base
M6 x 28mm
Screws
9
•
Fit the back base onto the bottom of both back legs, as shown.
•
Insert two M6 x 28mm screws into
M6 x 28mm
Screws
Front Base
Front Legs
10
•
Fit the front base onto the bottom of both front legs.
•
Insert two M6 x 28mm screws into
•
Turn the assembly upright.
Assembly
Back Legs
M6 x 28mm
Screws
each back leg and tighten.
M6 x 28mm
Screws
each front leg and tighten.
Footrest
11
•
Fit the sockets on the footrest onto the posts on the front of
the assembly.
•
Slide the footrest up onto the posts.
Hint: You may want to lower the seat to assemble the footrest.
Refer to page 13 for instructions to lower the seat.
BACK VIEW
M6 x 28mm Screws
12
•
While holding the footrest in place, insert two M6 x 28mm screws
into the holes on the back of the footrest and tighten.
6
Posts