Waypoint Data Display; Editing Waypoint Details - Raymarine Raynav 300 GPS Plotter Owner's Handbook Manual

Chapter 3: Operation

Waypoint Data Display

In plotter mode, waypoint data can be viewed in two ways; either using
the context-sensitive cursor to select the waypoint and display the pop-up
Waypoint Data Box, or by viewing waypoint details from the Waypoint
List.
➤
To display the waypoint details from the Waypoint List:
1. Select the waypoint from the Waypoint List as described in Selecting
2. To remove the Waypoint List and return to the default soft key dis-
➤
To display the Waypoint Data Box:
1. Move the cursor over the waypoint.
➤
To remove the Waypoint Data Box and soft keys either:
1. Move the cursor away from the waypoint, or...
2. Press CLEAR.

Editing Waypoint Details

You can change the name, symbol and position of any waypoint (except
the target waypoint).
➤
To edit a waypoint:
1. Select the waypoint, using the cursor or the Waypoint List, as
2. Press the EDIT WAYPOINT soft key. The Edit Waypoint soft keys are
SYMBOL
Note: The ERASE WPT soft key is only available via the Waypoint List.
a Waypoint on page 3-16.
The details for the selected waypoint are displayed. Temperature,
depth, date and time are included (if available) for waypoints placed
at the vessel's position.
play, press CLEAR twice.
• The Waypoint Data Box is displayed which indicates waypoint
number/name, bearing and range (or lat/lon if selected in the sys-
tem set up menu, see System Set Up Parameters on page 4-3).
• Whilst the cursor is over the waypoint, the waypoint soft keys are
displayed, see Figure 3-23.
described in Selecting a Waypoint on page 3-16. The waypoint soft
keys are displayed.
displayed:
NAME
Figure 3-24: Edit Waypoint Soft Keys
POSITION ERASE WPT
3-17
D4908-1