Controlling The Display; Selecting The Display Mode - Raymarine Raynav 300 GPS Plotter Owner's Handbook Manual

2-4

2.3 Controlling the Display

The display is controlled by means of the cursor and control keys. Most
plotter operations are started from the default soft keys displayed in the
plotter screen (Figure 2-4).
ROUTE
On completion of an action using the soft keys, press CLEAR to return to
the default screen; you may need to press CLEAR several times to
back-track through the soft key hierarchy.
Note: If you have set up your system so that the default soft keys are not
permanently displayed, press any soft key to display the labels.

Selecting the Display Mode

The DISPLAY key is used to select the desired display mode. The
following modes can be selected.
➤
Select the following modes by repeat presses of the DISPLAY key
(Figure 2-5):
•
•
•
•
•
•
•
The complete ranges of pages available in Boat and Environment Data
modes are described in Chapter 3.
GOTO
Figure 2-4: Default Soft Keys
GPS/Waypoint display
Boat Data (three pages)-Environment Data (two pages)
Course Deviation Indicator (CDI)-Bearing/Distance Indicator (BDI)
Data Boxes
Data Log
Plotter display
Return to GPS/Waypoint display
Raynav 300 GPS Plotter
SCREEN FIND SHIP
D4897-1